Automatical Bottle Extrusion Blow Molding Machine
Product Description
Extrusion Blow Molding Machine
Features of this Blow Molding Machine:
1) Japan PLC
2) Imported HMI
3) PLC automatic temperature control model
4) Imported electronic parts
5) Japan hydraulic valve, seal and proportional control
6) Hard gear surface decelerator +Japan inverter
7) Double station + High-precision guide +Large arm cylinder axle
8) Central-incoming extrusion die with special steel
Extrusion Blow Molding Machine workshop
Extrusion Blow Molding Machine Specification
| Basic Parameter | |
| Applicable Material | PE, PP.... |
| Max. Product Volume | Single die head:5L |
| Dry Cycle | 1100 pcs/h |
| Machine Size (L×W×H) | 2.9×1.8×2.6 (M) |
| Machine Weight | 5.8T |
| Total Power | 38KW |
| Power Consumption | 16KW/H |
| Plasticizing System | |
| Specification | good plasticizing capability, high output, transducer adjust speed, collect temperature-control signals to prevent the screw from cold starting |
| Speed Reducer | hard-teeth, low noise & wear-resistant speed reducer |
| Machine Barrel Screw | 60mm,L/D=24, 38CrMoALA high quality nitrogen steel |
| Plasticizing | 70Kg/H |
| Heating Zone | 3 Zone Casting, aluminum heater |
| Heating Power | 6.5KW |
| Extrusion Motor | three phase asynchronism motor (380V,50HZ),15KW |
| Automatic LiftingSystem | 4 turbos with same height lifting |
| Cooling fan | 3 zones 85W |
| Extruction System | |
| Specification | Continuous die head |
| Die Head | 38CrMoALA high quality nitrogen steel |
| Max. Dia. of Die Head | Single die head:140mm double die head: 90mm |
| Heating Zone | 3 zone heat coil of stainless steel |
| Central distance of die head | --- |
| Heating Power | 2.5 KW |
| Die Heat Huff | Pressure and capacity can be adjusted |
| Preform Adjustment | Automatic |
| Heat insulation | By heat insulating board between accumulator and hydraulic cylinder |
| Open and Clamping System | |
| Specification | Gear wheel and rack in-phaseaim at twin shaft clamping device, and cylinder |
| Clamping Force | 65KN |
| Mold Move Stroke | 158~518mm |
| Max. Mold Platen | W×H:320×380mm, |
| Max Mold Dimension | W×H×T: 380×400mm |
| ElectricControl System | |
| Specification | Standard PLC and colorful touch screen for blow molding machine |
| Touch Screen | Colorful touch screen, auto alarm, diagnose thesystem |
| Temperature Control | Self-regulation |
| Temperature Module | Taiwan I-7018RP automatic temperature module, digital |
| Action control | Japan Mitsubishi, programmable |
| Protection Function | Automatic alert and breakdown feedback double protection of mechanical apparatus |
| Hydraulic System | |
| Specification | Proportion pressure controller changing direction quickly and softly |
| Oil pump motor | three phase a synchronism (380V,50HZ),7.5KW |
| Hydraulic pump | Vane pump |
| Hydraulic valve | imported hydraulic components—YUKEN |
| System pressure | 100kg/CM2 |
| Pipes | Bilayer high pressure blast pipes |
| Cooling Mode | Water cool and oil cooler separately |
| Pneumatic System | |
| Specification | imported famous brand pneumatic pressure |
| Air Pressure | 0.6Mpa |
| Air Consumption | 0.8M3/min |
| Valve | TAIWAI AIRTAC |
| Cooling System | |
| Specification | mold,barrel,oil box adopt independent cooling waterway |
| Cooling Medium | water |
| Water Consumption | 40L/min |
| Water Pressure | 0.2-0.6MPa |
For More Details, please contact us directly, you are highly welcomed!
Product Categories : Blowing Machine
Premium Related Products
